Extron DVS605A 5 Input HDMI/VGA Seemless Switcher w/Audio

Description

Up for grabs is a brand new in box Extron DVS605A Seemless video switcher. Info below direct from Extron's website. Any questions please ask BEFORE purchase. Payment due within 24 hours of best offer acceptance.
DVS 605 Series
Video input
Number/signal type
2 RGBHV, RGBS, RGsB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video
3 HDMI (HDCP compliant)
Connectors
2 female 15-pin HD
3 female HDMI type A
Nominal level
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels
Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance
75 ohms
Horizontal frequency
15 kHz to 100 kHz
Vertical frequency
24 Hz to 75 Hz
Resolution range
640x480 to 1920x1200*, NTSC, PAL, SECAM, 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 2K sampled pixel for pixel
*reduced blanking
Return loss
>30 dB @ 5 MHz
DC offset (max. allowable)
0.5 V
Video processing
Decoder
12 bit digital (3D-adaptive comb filter)
Analog sampling
12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
Digital pixel data bit depth
8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
Colors
1 billion (10 bit processing)
Video output
Number/signal type
DVS 605, DVS 605 A
1 scaled RGBHV, RGBS, RGsB, or component video (YUVp/HDTV)
1 HDMI (HDCP compliant)
DVS 605 D, DVS 605 AD
1 scaled RGBHV, RGBS, RGsB, or component video (YUVp/HDTV)
1 HDMI (HDCP compliant)
(1) 3G-SDI or HD-SDI with genlock and loop through
Connectors
DVS 605, DVS 605 A
1 female 15-pin HD
1 female HDMI type A
DVS 605 D, DVS 605 AD
1 female 15-pin HD
1 female HDMI type A
3 female BNC: (1) 3G-SDI and HD-SDI, 1 genlock, and 1 genlock loop-through
Minimum/maximum levels
0.0 V to 1.0 Vp-p for Y of component video and for G of RGsB
0.0 V to 0.7 Vp-p for RGB and for R-Y and B-Y of component video
Impedance
75 ohms
Return loss
>21 dB @ 5 MHz
DC offset
±300 mV max.
Scaled resolution
640x480
6,8,9
, 800x600
6,8,9
, 852x480
6,8,9
, 1024x768
6,8,9
, 1024x852
6,8,9
, 1024x1024
6,8,9
,1280x768
6,8,9
, 1280x800
6,8,9
, 1280x1024
6,8,9
, 1360x765
6,8,9
, 1360x768
6,8,9
, 1365x768
6,8,9
, 1365x1024
6,8,9
, 1366x768
6,8,9
,1400x1050
6,8
, 1440x900
6,8,9
, 1600x900
6,8
, 1600x1200
6,8
, 1680x1050
6,8
, 1920x1200
6,8
HDTV 480p
7,8
, 576p
6
, 720p
3,4,5,6,7,8
, 1080i
6,7,8
, 1080p
1,2,3,4,5,6,7,8
, 2048x1080
1,2,3,4,5,6,7,8
1
= at 23.98 Hz,
2
= at 24 Hz,
3
= at 25 Hz,
4
= at 29.97 Hz,
5
= 30 Hz,
6
= at 50 Hz,
7
= at 59.94 Hz,
8
= at 60 Hz,
9
= at 75 Hz
Sync
Input type
RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
Output type
RGBHV, RGBS, RGsB, and bi-level or tri-level component video
Standards
Input: NTSC 3.58, NTSC 4.43, PAL, SECAM
Output: SMPTE 242M, SMPTE 424M, SMPTE 292M, SMPTE 293M, SMPTE 295M
Input level
2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level
TTL: 5.0 Vp-p, unterminated
Input impedance
Horizontal: 75 ohms
Vertical: 510 ohms
Output impedance
75 ohms
Max. input voltage
5.0 Vp-p
Output polarity
Positive or negative (selectable)
Audio — DVS 605 A, DVS 605 AD
Gain
Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response
Line out: 20 Hz to 20 kHz, ±0.5 dB
THD + Noise
Preamp: <0.110% @ 1 kHz, 20 kHz bandwidth, at maximum output level
Line out: <0.025% @ 1 kHz, 20 kHz bandwidth, at maximum output level
S/N at maximum power output (unweighted)
Preamp: 90 dB at rated maximum output
Line out: 90 dB at rated maximum output
Crosstalk
Preamp: ≤-80 dB @ 1 kHz, fully loaded
Line out: ≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation
>84 dB @ 1 kHz
Audio input — DVS 605 A, DVS 605 AD
Number/signal type
5 stereo, balanced/unbalanced
3 stereo, de-embedded from HDMI (LPCM-2Ch only)
Connectors
(5) 3.5 mm captive screw connector, 5 pole
3 female HDMI type A
Impedance
>10k ohms unbalanced, DC coupled
Nominal level
+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level
+21 dBu, (unbalanced)
Analog input gain
-53 dB to +24 dB, adjustable per input
NOTE
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — DVS 605 A, DVS 605 AD
Number/signal type
Stereo/mono, balanced/unbalanced
Fixed output
1 analog
1 S/PDIF digital audio (LPCM-2Ch, Dolby Digital, or DTS only)
1 HDMI embedded
1 optional 3G-SDI or HD-SDI embedded
Variable output
1 analog
Connectors
(2) 3.5 mm captive screw connectors, 5 pole
1 female RCA (S/PDIF)
1 female HDMI type A (shared with HDMI video)
1 optional female BNC (shared with 3G-SDI or HD-SDI video)
Impedance
50 ohms unbalanced, 100 ohms balanced
Gain error
±0.25 dB channel to channel
Maximum level (Hi-Z)
>+21 dBu, balanced; >+11 dBu, unbalanced
Analog output volume range
0 dB to -100 dB in 1.0 dB increments
Control/remote — scaler
Serial control port
1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole (uses 3 poles)
Baud rate and protocol
9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations
1 = Tx, 2 = Rx, 3 = GND, 4 = GND, 5 = modulated IR input
USB control ports
1 front panel female mini USB B
USB standards
USB 2.0, high speed
Ethernet control port
1 female RJ-45 connector
Ethernet data rate
10/100Base-T, half/full duplex with autodetect
Ethernet protocol
ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, Telnet
Ethernet default settings
Link speed and duplex level = autodetected
DHCP = Off, IP address = 192.168.254.254
Web server
Up to 200 simultaneous sessions
Contact closure
1 rear panel 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations
Pins 1, 2, 3, 4, 5 = inputs 1, 2, 3, 4, 5
IR remote control input
Rear panel captive screw connector (shared with RS-232, uses 2 poles):
38 kHz, hardwired, modulated
TTL level (0 to 5 V) infrared up to 1 MHz
Program control
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS
™
)
Microsoft® Internet Explorer®
General
Power supply
Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption
Full load
28.0 watts
Quiescent
20.1 watts
Standby
14.6 watts
Temperature/humidity
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling
Fan, air flows from right to left (as viewed from front panel)
Thermal dissipation
Full load
95.1 BTU/hr
Quiescent
68.1 BTU/hr
Standby
49.3 BTU/hr
Mounting
Rack mount
Yes, with included, pre-installed brackets
Enclosure type
Metal
Enclosure dimensions
1.72" H x 17.5" W x 10.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.7 cm D)
(Depth excludes connectors and knobs.  Width excludes rack ears.)
Product weight
DVS 605
4.9 lbs (2.2 kg)
DVS 605 D
5.1 lbs (2.3 kg)
DVS 605 A
5.3 lbs (2.4 kg)
DVS 605 AD
5.4 lbs (2.5 kg)
Vibration
ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety
CE, c-UL, UL
EMI/EMC
CE, C-tick, FCC Class A, ICES, VCCI
Environmental
Complies with the appropriate requirements of RoHS, WEEE.