-40%

Lennox LF24-400A-5 Propane or Natural Gas Heater Unit for Repair, 390,000 BTU

$ 263.99

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Custom Bundle: No
  • Input BTUH: More Than 20 Ton (240,000 BTUH)
  • Model: LF24-400A-5
  • Modified Item: No
  • Power Phase: 1 Phase
  • Country/Region of Manufacture: United States
  • Output BTUH: More Than 20 Ton (240,000 BTUH)
  • Voltage: 120 V
  • Brand: Lennox
  • MPN: LF24-400A-5
  • Power Source: Natural Gas
  • Condition: Please see the description and photos for details.

    Description

    Another item from GNL Designs, Great Northern Liquidation, Springfield, Vermont.
    Lennox LF24-400A-5 Propane or Natural Gas Heater Unit for Repair, 390,000 BTU
    We used this heater for our warehouse from the winter of 2012-13 to this last winter 2019-20 when during a maintenance call we were told it was time to renew the burners (they were no longer firing properly).
    Because we were in a position to change over to a Modine,
    which is our heating company's preferred brand (cheaper parts and service because of their relationship with the company, and because Lennox has poor distribution into our area of Vermont/New Hampshire), we decided to go ahead and do that.
    We are looking for a buyer in an area that has better Lennox distribution, and thus lower priced parts and service, so they can reasonably replace the burners in this unit and related parts, and properly service it for a new life.
    We originally received it as a natural gas heater, and had it converted for propane use, so I'm confident that if you need it to work on natural gas, you can get it converted back to that.
    One thing I can report, comparing the Lennox to the similar single fan Modine we installed, is that the Lennox was much quieter with its dual fans.  Both are up to the task of heating this warehouse.
    Aside from the burner issue, the heater was working fine (the fans, exhaust, electronics, and valve all were working fine).
    Physically, the unit is in decent condition overall.  It is missing one directional fin, two hangers were removed, and two were bent over during removal (and removed after the pictures were taken and not included).  There are scratches, scuffs and general handling marks.
    Specs:
    Horizontal unit heater
    Aluminized steel heat exchanger
    80% thermal efficiency
    390,000 BTU input
    312,000 BTU output
    120VAC 9A total unit electrical
    Sidewall venting
    The spec sheet indicates the following dimensions: 41-1/8" wide x 41-1/8" deep x 32-3/16" high, including projections in back.  Actual measurements are 47-1/2" wide x 41-1/8" deep x 39" because of the exhaust in back top and the valve on the right rear.
    The spec sheet indicates a weight of 285 pounds
    The spec sheet and manual can be found with a simple google search for much more detail.
    This item will ship by motor freight.  Please message us for a shipping quote.  A commercial address or a local freight depot are the cheapest destinations for us to ship to.
    Unpacked weight & size:  285, 47.5x41x39
    Packed weight & size:  400, 50x48x48
    Package Notes & Ref:  0E71, freight
    :
    Note: Unless specifically indicated otherwise, the shipping charge quoted is to addresses in the
    contiguous 48 United States.
    Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations.  This particularly applies if the shipping charge is zero ({{detail_product_description}}).
    :
    Please also note that my liability for product defects is limited to the purchase price plus shipping. I am not responsible for the installation, training in the use of, or operation of any item I sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.