NEW! Morse Drum Hand Pump for Acids, Ketones or Acetates up to 2000 SSU!!

Description

NEW! Morse Drum Hand Pump for Acids, Ketones or Acetates up to 2000 SSU!!
SHIPPING IS IN THE LOWER 48 STATES
Usually ships in 5 to 8 days
Drum Hand Pump, General Guide: Some Acids, Caustics, Ketones Or Acetates, Up To 2000 SSU Viscosity
Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels.
Suction lift tested for 15 feet (4.6 m) minimum
Discharge head up to 25 feet (7.3 m)
Output head pressure is up to 10.83 psi
1" (2.54 cm) NPT suction tube
3/4" (1.9 cm) NPT discharge tube
Two position drum pump handle
Handle can be mounted above the drum hand pump extending 20.5" (52 cm) above the bung when upright.
Mount handle below the drum hand pump for easier operation from below with the drum on a truck or platform.
Self-lubricating Polytetrafluoroethylene piston ring operates wet or dry for long life
Chemically compatible with liquids up to 120 F (49 C)
Handle viscosity up to 2,000 SSU (about as thick as 30 weight motor oil at room temperature). Handle effort increases as viscosity approaches this maximum.
Models 26, 271-AE and 27-4AV drum / barrel pumps are generally useful with compatible liquids in a mild acidity/alkalinity range of pH 4 to 9. Avoid stronger acids and caustics.
Models 28-5BV and 28-6BE drum / barrel pumps are useful in a wider pH range.
Many other chemical characteristics effect choice of barrel pump (see drum pump chart or chemical compatibility at morsedrum.com for specific fluids)
WBB806431
Product Specifications
BRAND
Morse
COMPATIBLE LIQUIDS
Some Acids, Caustics; Keytons, Acetates
CONSTRUCTION
Ryton
DISCHARGE SPOUT DIAMETER INCHES
3/4" EPDM
GASKET MATERIAL
EPDM
MANUFACTURERS PART NUMBER
28-6BE
SEAL CONSTRUCTION
EPDM
SUCTION TUBE DIMENSION INCHES
1 Polytetrafluoroethylene
TEMPERATURE RANGE DEGREES                                   F
120
THREAD INCHES
2 NPT
TYPE
Drum Hand Pump
WEIGHT LBS
11